¿Cómo se ajusta la válvula de alivio de mi Ball Intake Valve y cómo se sabe a qué presión está ajustada?
Aprenda a ajustar la válvula de alivio en una Ball Intake Valve. Gire el tornillo hasta que la marca de presión deseada quede al ras: hacia afuera para bajar la presión y hacia adentro para subirla.
There are pressures marked around the perimeter of the housing. Turn the screw in or out until the step that has the pressure you desire is flush with the face of the part that turns. Out lowers the pressure, in raises it.
If you need to adjust your pressure relief valve, the process is very simple.
Tools Needed:
- ¼" allen wrench
Adjusting the PRV
- Line the allen wrench up with the center key on the bottom of the PRV
- Turn the center plug until it is calibrated to the desired setting
Reminders:
- Do not use a spanner wrench to adjust the PRV
- Do not adjust or remove the plug near the PRV