Skip to content
English
  • There are no suggestions because the search field is empty.

How do I program stow and deploy positions on a Flex monitor using the SmartPlex app?

Program custom Stow and Deploy positions for your Flex Monitor using the SmartPlex App. This guide walks you through setting and saving specific monitor positions, so you can automate stowing and deploying at the touch of a button.

With the TFT SmartPlex App, you can easily program Stow and Deploy positions for your Flex Monitor. These predefined positions allow for faster setup and safer operation with consistent parking and deployment sequences.

Step-by-Step Instructions

  1. Access the Monitor Hub

    • Launch the SmartPlex App and connect to your Flex Monitor.

    • From the home screen, select the Monitor Hub.

  2. Enter Program Monitor

    • Tap Program Monitor from the hub page.

  3. Enter Program Stow Mode

    • Scroll down and select Program Stow.

    • You’ll see indicators (flashing yellow lights) on any connected controller or panel mount to confirm the monitor is in programming mode.

  4. Set the First Stow Position

    • Manually move the monitor to the desired first stow position.

    • Tap Store Stow Position in the app.

    • A green confirmation box will appear in the app. Any connected controller will flash white.

  5. Repeat for Additional Stow Points (Optional)

    • If your stow sequence requires more positions, repeat the move-and-store process.

    • Once all positions are saved, tap Done to exit programming mode.

  6. Verify and Operate Stow Function

    • Return to the Monitor Hub and enter Operate Monitor.

    • Tap Stow to test. The monitor will move to the programmed stow position.

    • The controller will flash yellow during stow and turn blue once the sequence is complete.

  7. Deploy Function

    • After programming stow, you can use Stow Deploy to return the monitor to a preset deploy position, typically 50% horizontal and 50% vertical.